Phoenix Contact NZ | UT Terminal Blocks, QUINT Power Supplies

Phoenix Contact Parts, New Zealand

RFQ / Phoenix Contact

Terminal blocks, power supplies, relays, I/O and connectors. Send us the seven-digit order number.

Phoenix Contact is in almost every control panel in New Zealand. Terminal blocks, DIN rail power supplies, interface relays, modular I/O, surge protection, networking and connectors.

Most of it is consumable. Terminal blocks get added to, power supplies fail, relay modules wear out. We supply the current range as a distributor and hold surplus for the discontinued parts.

Request a quote

Reference pages by category

We publish the order number tables we use ourselves, taken from Phoenix Contact documentation.

Terminal blocks and wiring

Page	Covers
Terminal blocks	UT order numbers with conductor ranges, colour and PE suffixes, connection technologies, and the accessories that get forgotten
Connectors and cordsets	SACC M12 order numbers. Plug versus socket, gland sizes, coding letters, shielding and HEAVYCON

Power

Page	Covers
Power supplies	QUINT, TRIO, STEP and UNO. Generation decode, amps versus watts, and why a buffer module is not a power supply
Surge protection	VAL-MS, PLUGTRAB and TERMITRAB. Replacement plugs, Type 1 2 and 3 explained, and IT system variants

Switching and signal

Page	Covers
Interface relays	PLC-INTERFACE base, relay and complete set order numbers, plus bridges and markers
Signal conditioners and isolators	MINI Analog and MACX Analog. EX variants, SIL ratings and HART
CONTACTRON hybrid motor starters	ELR order numbers. H3 versus H5, the function letters, and group shutdown

I/O and networking

Page	Covers
Axioline and Inline I/O	Axioline F and Smart Elements, why Smart Elements need a backplane, bus couplers and Inline
Factoryline switches and networking	FL SWITCH and mGuard. Managed versus unmanaged, port codes and PoE

The order number is what identifies the part

Phoenix Contact uses a seven-digit order number alongside the type designation, and the number is what you should send us.

The reason is colour. The same terminal block in a different colour is a different part.

Order number	Type	Colour
3044076	UT 2,5	Grey
3044089	UT 2,5 BU	Blue

Identical specification, different colour, different order number. Both are 1000 V, 24 A, screw connection, 2.5 mm sq nominal, 0.14 to 4 mm sq range, on NS 35/7,5 or NS 35/15 rail.

BU is blue, conventionally used for neutral, and PE is green-yellow for protective conductor.

The parts that need other parts

This pattern runs across the Phoenix range and is worth knowing before you order anything modular.

Part	What it also needs
PLC-BSC relay base	A plug-in relay. The base alone does nothing
AXL SE Smart Elements	An AXL F BP backplane. No bus communication without one
Terminal strips	End cover, two end clamps, and bridges if terminals are linked
Fuse terminals	The fuse itself, ordered separately
Interface relay banks	FBST bridges for potential distribution
CONTACTRON group shutdown	DIN rail connectors
HEAVYCON assemblies	Contact insert, frame, housing and PE contact, all separate

Tell us what you are building and we will include the parts that make it work rather than just the ones you named.

The base plus replaceable element pattern

Worth knowing because it usually means the cheaper order is the right one.

Range	Stays in place	Gets replaced
PLC-INTERFACE	PLC-BSC base, wired	REL-MR plug-in relay
Surge protection	VAL-MS base element	The ST protective plug

If a relay has worn out or a surge protector has done its job, the base and its wiring are usually fine. Order the element, not the assembly. On a panel with thirty of them that is a substantial difference.

The connection technology is in the family name

Family	Connection
UT	Screw connection
UK	Screw connection, earlier generation
ST	Spring-cage connection
PT	Push-in connection
QT	Quick connection
CLIPLINE complete	The system all of these belong to

Push-in is the fastest to wire because a ferruled conductor pushes straight in without a tool. Spring-cage needs a screwdriver to open the clamp. Screw needs torquing.

If you are extending an existing terminal strip, match the family. Mixing screw and push-in on one rail works electrically but makes the panel harder to maintain and bridges are not shared.

Note that SC and PT also appear as connection codes in the CONTACTRON range, and SP in the MACX Analog range, all meaning screw or push-in. Same idea, different letters depending on where you are in the catalogue.

The Phoenix Contact families

Family	What it is
UT, UK, ST, PT, QT	Terminal blocks, CLIPLINE complete
UTN, UTI, UTTB	Large cross section, low profile and double-level terminals
PTTB, DIK, D-UK, D-ST	Double-level, disconnect and end covers
HESILED, HESILA	Fuse terminal blocks with LED indication
QUINT, TRIO, STEP, UNO	DIN rail power supplies
QUINT-BUFFER, QUINT-UPS, QUINT-ORING	Buffer, UPS and redundancy modules
PLC-RSC, PLC-BSC, PLC-RPT, REL-MR	PLC-INTERFACE relay modules
PLC-OSC, PLC-OPT, OPT	Solid-state relay and optocoupler modules
DEK-REL, EMG, PR series	Relay modules
ELR, CONTACTRON	Hybrid motor starters
MINI Analog, MINI MCR	Compact signal conditioners
MACX Analog, MACX MCR	Ex i and functional safety signal conditioners
AXL F, AXL SE, AXL E	Axioline modular I/O
IB IL, Inline	Previous generation modular I/O
PLCnext, AXC	Controllers
VAL, PLUGTRAB, TERMITRAB	Surge protection
FL SWITCH, FL MGUARD, FL WLAN	Factoryline networking
SAC, SACC, QUICKON	Sensor and actuator cabling
HC, HEAVYCON	Heavy duty connectors
ZB, UC, UCT	Marking systems and labels
FBS, FBST	Plug-in bridges
NS 35/7,5, NS 35/15	DIN rail
CLIPFIX, E/UK, ATP	End clamps, end covers and partition plates

What we can supply

Current production. The full CLIPLINE terminal range, QUINT and TRIO power supplies, PLC-INTERFACE relays, CONTACTRON starters, MINI and MACX Analog, Axioline I/O, surge protection, Factoryline switches, connectors and marking systems. Quoted with a delivered lead time.

Bulk and panel-build orders. Terminal blocks, interface relays and connectors are the definition of a bulk item. Send us the schedule and we will quote the lot including bridges, end covers, markers and rail.

Discontinued. Older UK terminals, earlier power supply generations, Inline IB IL parts and superseded signal conditioners. Surplus and tested used.

What to send us

The seven-digit order number. That is the definitive identifier, especially where colour variants exist.

Or the type designation and colour. UT 2,5 BU is enough for us to find 3044089.

For a panel build, the schedule. We will include the accessories that get forgotten.

Common questions

Can you get a part that is not listed on your site?
Usually. The site shows what we hold, not what we can source. Send the order number.

Do you supply in packs?
Terminal blocks are normally supplied in packs of 50 or 100 depending on the type. Tell us the quantity you need and we will quote accordingly.

I only need the relay, not the whole module.
Then that is what we will quote. See the interface relay page.

What is the lead time?
Ex stock items ship the next working day within New Zealand. We give you a firm lead time with the quote.

Do you quote in NZD?
Yes, in NZD including GST for New Zealand customers.

Send us your order numbers

One part or a full panel schedule. Quotes in NZD including GST.

Request a quote

Industech is an independent supplier of new, surplus and used industrial automation equipment. We are not an authorised distributor of, approved by, sanctioned by, or affiliated with Phoenix Contact GmbH & Co. KG. Phoenix Contact, CLIPLINE, QUINT, TRIO, CONTACTRON, MINI Analog, MACX Analog, Axioline, Inline, PLCnext, Factoryline, HEAVYCON and mGuard are trademarks of Phoenix Contact. All trademarks, brand names and order numbers are the property of their respective owners and are used here for identification purposes only.