Siemens ET 200M Distributed I/O
Siemens / ET 200M
IM 153 interface modules, bus modules and accessories. Plus the one thing about ET 200M that saves people a lot of searching.
ET 200M uses S7-300 modules
This is the most useful thing to know about the platform. An ET 200M station is an IM 153 interface module plus ordinary S7-300 signal modules on a standard rail. Same installation system, same modules, same front connectors.
So if you are chasing a digital or analog module for a distributed rack, you are looking for an S7-300 part:
- SM 321 digital input
- SM 322 digital output and relay
- SM 331 analog input, RTD, thermocouple and HART
- SM 332 analog output
Only the interface module and the bus modules are ET 200M specific. Those are below.
IM 153 interface modules
| Article number | Module | Notes |
|---|---|---|
| 6ES7153-1AA03-0XB0 | IM 153-1, DP ST | Standard temperature. 350 mA max at 24 V DC, 1 A to backplane, typ. 3 W loss |
| 6ES7153-2BA02-0XB0 | IM 153-2 | |
| 6ES7153-2BA10-0XB0 | IM 153-2 HF, High Feature | 650 mA max, 1.5 A to backplane, typ. 5.5 W loss |
| 6ES7153-2BA70-0XB0 | IM 153-2 HF Outdoor | Extended temperature. Same electricals as the 2BA10 |
| 6ES7153-4AA00-0XB0 | IM 153-4 PN | PROFINET |
| 6ES7153-4AA01-0XB0 | IM 153-4 PN | PROFINET |
| 6AG1153-1AA03-2XB0 | SIPLUS IM 153-1 | Standard equivalent 6ES7153-1AA03-0XB0 |
How to read an IM 153-2 number
The differences between variants are invisible on the front of the module, so the article number is the only guide.
| Number pattern | Interface |
|---|---|
| 6ES7153-2AA.. | RS 485 |
| 6ES7153-2BA.. | RS 485 |
| 6ES7153-2AB.. | Fibre optic |
| 6ES7153-2BB.. | Fibre optic |
Functions that vary by version include SYNC and FREEZE, direct data exchange, direct data exchange with F modules, the 96 byte expanded diagnostic frame, operating twelve modules behind the interface, firmware update via PROFIBUS DP, firmware update via Micro Memory Card, DPV1 mode and IQ-sense support.
If you cannot find your exact variant
Siemens states that the IM 153-2Bxx1 is a spare part for the IM 153-2 across the whole 6ES7153-2xxxx-0XB0 range, and that it can additionally serve as the interface module for a DP/PA link or a Y link.
That is the answer to most unobtainable-variant enquiries on this platform, and hardly anyone publishes it. Send us your number and we will tell you whether it applies to you.
Bus modules and accessories
| Article number | Description |
|---|---|
| 6ES7195-7HA00-0XA0 | Bus module for a power supply plus an IM 153, hot swap during RUN, includes cover |
| 6ES7195-7HB00-0XA0 | Bus module for two 40 mm wide I/O modules, hot swap |
| 6ES7195-7HD00-0XA0 | Bus module BM IM/IM, earlier version |
| 6ES7195-7HD10-0XA0 | Active IM 153/IM 153 bus module, for two IM 153-2 High Feature in a redundant system |
| 6ES7195-7KF00-0XA0 | Separator module |
One catch worth knowing. Siemens notes that firmware update via PROFIBUS DP is not available when operating with the older bus module 6ES7195-7HD00-0XA0. If you need that capability you want the 7HD10.
HART and process automation
The ET 200M acts as HART master for HART field devices, including in hazardous areas, with the IM 153-2 passing parameter data from the engineering station through the HART analog input module to the instrument.
The HART modules themselves are S7-300 parts: 6ES7331-7TB00-0AB0, 6ES7331-7TF01-0AB0 and 6ES7332-8TF01-0AB0. See the SM 331 page.
New Zealand process plants run a lot of HART instrumentation, these modules are expensive, and very few suppliers list them. If you need one, ask.
Front connectors
Same as S7-300, ordered separately from the module.
| Article number | Connector |
|---|---|
| 6ES7392-1AJ00-0AA0 | 20-pin, screw terminals |
| 6ES7392-1AM00-0AA0 | 40-pin, screw terminals |
| 6ES7392-1BM01-0AA0 | 40-pin, spring terminals |
Send us your article numbers
Interface module, bus module or signal modules, or all three. We will come back with price, condition and lead time. Quotes in NZD including GST.
Industech is an independent supplier of new, surplus and used industrial automation equipment. We are not an authorised distributor of, approved by, sanctioned by, or affiliated with Siemens AG. All trademarks, brand names and article numbers are the property of their respective owners and are used here for identification purposes only.
Forestry
Manufacturing
Mining
Agricultural
FMCG
Petrochemical
Pharmaceutical
BMS
New
With a great range of the top brands, make us part of your next project.
Asset realization
Ask us about our asset realization program to turn your unused spare parts into cash instead of letting them collect dust on the shelf.
Legacy equipment
With our professional expertise, we can help you source and acquire those elusive legacy parts at competitive prices.
What Makes Us Different?
We make it our business to understand your business
We take the time to understand your needs and goals for your plant or project, with reliability and longevity as our top priorities.
Ethical Pricing
At Industech, we take pride in our ethical pricing structure, ensuring you receive the best value we can offer.
We supply new, surplus and cost-effective alternatives from major industrial brands including:
IFM
- Siemens
- Lenze
- B&R Automation
- ABB
- Rockwell Automation (Allen Bradley)
- Schneider Electric
- Berger Lahr
- PILZ
- Sick
- Emerson Electric
- Festo
- Beckhoff
- Omron Corporation
- General Electric (GE)
- Banner
- Keyence
- HBM and so much more.